Print Settings Guide

Optimizing your machine for the best results on Gedli models.

Quick Start

Every model on Gedli includes recommended settings from the creator. Start with those! However, every printer is different, so here is a general optimization guide.

Layer Height

0.1mm - 0.2mm

Lower height means more detail but longer print time.

Infill Density

15% - 25%

The internal structure of the print. 20% is standard for most decorative items.

Print Speed

40mm/s - 60mm/s

Balance between speed and quality. Slower is usually better for detail.

Slicing Best Practices

Bed Adhesion

Always use a brim for tall/thin models to prevent them from detaching during printing.

Supports

Tree supports are highly recommended for organic models to save material and reduce scarring.

Still having issues?

Check our Troubleshooting guide for specific error fixes.

View Troubleshooting →